The Diagnostic Instruments Table Mount is designed to allow a boom stand attachment to
1.0" or 25mm center to center tapped hole patterns like those seen on vibration isolation
tables. It also comes with a backing plate to increase mounting strength on standard table
tops. With this type of mount, tipover and rigidity are not concerns. The TM1 is made of solid
300 series stainless steel to match the anti-corrosion characteristics of the boom stands
they support. The TM1 includes the top mounting plate, the bottom backing plate, three sets of 1/4-20
mounting fasteners (7/8", 2" and 2-3/4"), and one set of M6x20mm mounting fasteners.The
mounting hole accepts a 3/8"-16 socket head cap screw.
The Diagnostic Instruments Table Mount is designed to allow a boom stand attachment to
1.0" or 25mm center to center tapped hole patterns like those seen on vibration isolation
tables. It also comes with a backing plate to increase mounting strength on standard table
tops. With this type of mount, tipover and rigidity are not concerns. The TM1 is made of solid
300 series stainless steel to match the anti-corrosion characteristics of the boom stands
they support. The TM1 includes the top mounting plate, the bottom backing plate, three sets of 1/4-20
mounting fasteners (7/8", 2" and 2-3/4"), and one set of M6x20mm mounting fasteners.The
mounting hole accepts a 3/8"-16 socket head cap screw.