Micro force measurements, 100 micorgram resolution at 100 samples per second
using our 100 gram transducer.
Optical density meausrements, e.g.
Electrophoresis
Features:
90 day satisfaction guarantee.
Wide dynamic range: Up to 24 bits rms resolution:
22 bits at 50/60 samples per second; 20 bits at 1000 samples/sec.
Two independent 24 bit Delta-Sigma AD's independently
programmable.
Programmable: zero, span, rate (5 to 120 samples
per second), polled, free-run, triggered, baud rate (9600 to 230 kbps),
range via PGA gain (1 to 8), autocalibrate...........
Over 160 db of power line noise rejection at 50/60
sampling rates.
Two dry contact (relay) outputs; optional, optoisolated
(5 ohm MOS) or CMOS levels.
Simple easy to learn command set: 3 top level, and
12 configuration commands (6 X 2 AD's).
LED's so you know that the thing is working, and
doing what you "thought" you told it to do.
Demo interface software for windows in vanilla API
and C (no C++ and no MFC, beginnings should be easy).
Closed case solution - to move to another computer
just move the plug. No IRQ's, No DMA's to set, no DIP switches.
USB interface using 4 COM port module (allows 16
A/D channels and 32 digital I/O per USB hub port).
Reliable with mainly thru hole technology and socketed
IC's; NOT a throw away surface mount unit. Varistor and fuse protected.
100 hour power cycled burn-in; drop and shake tested.
Intenational: Powered by wall transformer with world-wide
standard 2.1mm barrel connector.
